Staub-electronics WB-600-FP WATTBOX - FACEPLATE DISPLAY OPTION FOR 6 Manual de usuario descargar pdf (Pagina 5)

WATTBOX™ WB-600-FP Installation and Users Manual

pg.5

™

TROUBLESHOOTING

Symptom Possible Cause Remedy

The Wattbox

™

is not receiving power. The Wattbox

™

is not turned On. • Turn the Wattbox

™

switch on.

Make sure the Wattbox

™

’s AC power

plug is plugged into a properly

grounded 120 volts (nominal) wall

outlet.

• In some households, a wall switch

may need to be turned on to make

the wall outlet active. Try turning on

the light switches located near the

wall outlet.

Too many devices are connected, causing

an overload, tripping the Thermal Circuit

Breaker.

• Press the Wattbox

™

resettable circuit

breaker button in to reset. Please

allow 10 minutes before attempting

to reset. If reset too soon, the

breaker will prematurely sense power

overload and not allow the Wattbox

™

to operate.

• If the circuit breaker continues to trip,

try moving one or more components

to another Wattbox

™

. Too much

current may be drawing through one

Wattbox

™

Component is not receiving power. The component is plugged into a switched

outlet and the Wattbox

™

has not been turned

On.

• Turn the Wattbox

™

On.

• Or, plug the component into an

unswitched outlet.

The Wattbox

™

is plugged into a switched

outlet, but power on the component is not

On. In some instances, a component plugged

into a switched outlet won’t receive power

when the Wattbox

™

is turned On unless the

component power is also switched On.

• Turn the component power On.

Speakers emit a humming or buzzing noise. The Wattbox

™

is sharing AC power with

equipment that is not properly grounded.

• Connect your Wattbox

™

to a

dedicated outlet.

• Try unplugging different components

from the Wattbox

™

one at a time to

see if the noise stops.

• If a component is discovered to be

improperly grounded, attach a copper

wire from the component’s chassis to

the Wattbox

™

’s grounding post.

Contacting Technical Support - Phone: (866) 838-5052 - Email: Techsupport@snapav.com

1 2 3 4 5 6

Comentarios a estos manuales

Sin comentarios

Staub-electronics WB-600-FP WATTBOX - FACEPLATE DISPLAY OPTION FOR 6 Manual de usuario Pagina 5

Comentarios a estos manuales

Relacionado con productos y manuales para Accesorios para eléctrica Staub-electronics WB-600-FP WATTBOX - FACEPLATE DISPLAY OPTION FOR 6